← All help topics

Post moderation via the messenger

One of your channels can be a «moderation channel»: new drafts go there with «Approve/Fix» buttons, and moderators vote right in Telegram. A post is approved once the quorum is reached.

1How to enable

In «Channels» open the channel you want (usually a separate group/chat where moderators sit) → «Edit» → tick «🛡 Moderation channel» and set the «Quorum» — how many people must press «Approve». Only ONE channel can be the moderation one: enabling it elsewhere clears the previous. The channel's bot must be a member of that chat (an admin for groups is best).

2How it works

When a new post awaiting approval appears (i.e. WITHOUT auto-posting), it's sent to the moderation channel JUST AS it will look in the channel — with the image or video and the same text, no service labels. Below it are the buttons:

  • ✅ «Approve (N of K)» — the counter shows how many moderators have approved and how many are needed. Once the quorum is reached the post becomes «Approved» and enters the publishing queue, and the buttons disappear.
  • ✏️ «Fix» — the bot asks for a remark (reply to its message). The system rewrites the text per the remark, updates the post's caption (votes reset) AND adds the remark to the project's «Editorial rules».
  • ❌ «Reject» — the post goes to «Rejected» and won't publish (marked «Rejected», buttons disappear).
  • 🔄 «Refresh image/video» — regenerates the post's media (re-animates if it's a video, otherwise makes a new image); the message updates itself once ready.

3Making the buttons work (receiving presses)

For the «Approve/Fix» presses and moderators' replies to reach the service, the bot must «listen» for messages. You do NOT enter any address for this — the service sets it up itself. All you need is:

  1. 🤖 Connect YOUR OWN bot in «Bots» and press «Check connection» — this turns on receiving button presses. Enabling the «Moderation channel» does the same automatically.
  2. 📣 Add that bot to the moderation chat (an admin for groups is best), so it can post there and see replies.

No addresses, webhook tokens or secrets need to be entered by hand — it's all configured for you.

4If the buttons don't respond

  • 🔄 Open «Bots», pick the moderation channel's bot and press «Check connection» again.
  • 👥 Make sure the bot is in the moderation chat and hasn't been stopped or removed from it.
  • 🤖 Use your own bot (with a token from @BotFather) attached to the moderation channel.
  • If the buttons still don't work — contact support: the service may be temporarily unable to receive messages from Telegram. That's resolved on the service side, not yours.

5Notes

  • Posts with «Auto-posting» (auto-approval) enabled do NOT go to moderation — they publish on their own anyway.
  • Drafts are still visible in the dashboard («Plan & post queue») — you can approve there or in the messenger.
  • A moderator counts once (repeat presses don't increase the count).
  • Make the moderation channel a separate private chat/group with moderators, not your public audience channel.

Didn't find an answer? Write to us — we'll help.

Contact support